worm reduction gearbox has the following specifications:
1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and worm reduction gearbox can be used with various mechanical equipment.
2. Large transmission ratio can be obtained by single-stage transmission, and the worm reduction gearbox structure is compact. Most types of reducers have good self-locking performance, and braking devices can be saved for mechanical equipment with braking requirements.
3. The meshing friction loss between the worm thread and the tooth surface of the worm gear is large, so the transmission efficiency is lower than that of the gear, and it is easy to heat up and the temperature is higher.
4. Higher requirements for lubrication and cooling.
5. Good compatibility, worm gears, and worms are manufactured according to national standards, and bearings, oil seals, etc. are all standard parts.
6. The box body type includes the basic type (the box body is a vertical or horizontal structure with a foot plate) and universal type (the box body is a cuboid, with fixed screw holes on many sides, without a foot plate or with another footplate)
7. There are two types of input shaft connection: basic type (single input shaft and double input shaft) and motor flange.
8. The position direction of output and input shafts has the input shaft at the bottom and at the top; the Output axis up and down; Input axis up and down.
Please feel free to contact us if you have more demand :