The speed of a car has always been the first consideration for consumers when buying a car. Since speed is the most important one, the speed increaser, and the gear speed reducer, what is the difference between these two gear units? we will introduce it to everyone.

Gear reducer and Speed ​​Increaser Introduction: Gear Reducer

The gear reducer plays a role in matching the rotation speed and transmitting torque between the prime mover and the working machine or actuator. The gear reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque.
It can be divided into single-stage and multi-stage gear reducers according to the number of transmission stages. According to the shape of the gear factory wheel, it can be divided into cylindrical gear reducers, bevel gear reducers, and cone-cylindrical lead gear reducers. Divided into expansion type, split type, and co-axial gear reducer. The gearbox is an independent component composed of gear transmission, worm transmission, and gear-worm transmission enclosed in a rigid housing. It is often used as a reduction transmission between the prime mover and the working machine. It plays the role of matching speed and torque transmission between the prime mover and the working machine or actuator. It is widely used in modern machinery.


Gear speed ​​reducer and speed increaser introduction: speed increaser

The speed increaser of the machine tool spindle is referred to as speed increaser or speed increaser also called speed increase tool holder. The mechanical speed increaser is directly installed in the taper hole of the main shaft of the machine tool through a shank (BT DIN, etc.), and is tightened by a pulling nail mechanism, which is almost the same as the ordinary tool holder installation. It can be easily installed on the output taper holes of various machine tool spindles. When ceramic bearings are used, the speed can be increased by 7 times, and the maximum speed can be up to 40,000rpm.

The above information is the difference between the gear reducer and the gearbox speed increaser introduced. In fact, friends who know their own cars should know this knowledge very well. When both are used, pay attention to maintenance.

you can consult us if you have more queries: